In 2013, of all entrances in the US market, sliding patio doors represented about 11%. It continues to increase this year. However, if you want to replace it with a new one, you should know how to remove patio sliding door.
This is because removing patio sliding doors requires more effort. You should even ask your friends for help to do it. If you want to know how to remove patio sliding door, here are the steps:
1. Prepare The Floor
The first step is that you can cover the floor using foam sheets. You need to do this to protect your floors and sliding doors.
Then, these foam sheets are useful for preventing the glass from breaking when you remove the panel. Also, it will protect your floor from chipping and scratching.
2. Remove The Screen Door
You can remove the screen for your patio sliding door if you have one. To lift the screen door, you can use a flat screwdriver. Then, lift the roller off the track.
Meanwhile, to completely remove the door from its track, repeat at the top of the screen door. Then, set your sliding door aside in a safe place.
3. Unscrew The Interior Casing or Trim
To remove the interior casing or trim, you can use a Phillips head screwdriver. You can find these on the inside of the door, but be careful not to damage the material.
Moreover, you need to remove all the dirt beforehand. Afterward, remove the head stop and decorative trim that is on the top of the doorframe.
4. Remove The Patio Sliding Door Panel
To make the door come out easily, you can slide the door to the indentation point in the track. Then, locate the roller adjustment screw on the sliding panel. However, make sure the screws are either at the bottom of the door or on the side panels at both ends.
To turn the screw counterclockwise, you can use a Phillips screwdriver. You need to do this to raise the rollers. Then, lift your patio sliding door to the upper track.
Next, you can slowly lower the panel until it comes off the track. Then, to remove it from the frame entirely, tilt it. Then, set the panel aside in a safe place.
5. Remove The Stationary Door Panel
How to remove patio sliding door is quite easy. The next step is you have to remove the stationary door panel by removing all the screws and brackets. Also, remove the trim pieces and metal strips. To lift it off the track, you can attach a flat pry bar to the bottom of the panel.
6. Remove The Track and Door Jamb
To lift the track and door jamb, you can use a pry bar. However, you need to do this if you want to replace the terrace and track sliding doors.
If the bottom track doesn’t lift, you can use a reciprocating saw to cut the screws. Then, use a saw to cut the bottom track in half and remove it. Also, remove any nails, paint, or caulk that can hold the door jamb to the frame.
The final step is to pry up the doorframe sill with a hammer and a pry bar. However, before replacing the sliding patio door, remove the nails.
Those are some steps in how to remove patio sliding door. You can do this as long as you follow the instructions in detail. To make it easier for you to do this, you can ask your friends or partner to do it.