In the United States, every 15 seconds there is a house burglary. Moreover, burglars prefer houses with sliding doors because they are easy to break into. Therefore, you need to know about sliding door handle replacement.
This is because sometimes the sliding door handle loosens easily so you need to fix it. If you don’t do it, it can endanger the security of your home. The following are some steps for sliding door handle replacement:
If you are looking to replace your sliding door handle, there are a few tools you’ll need. However, the tools are very simple and you must have them at home. If you want to know what tools to replace the sliding door handle, here’s the list:
Flat screwdriver
Ne handle for sliding door
Drill
Mortise rod
Screw
Putty
How to Replace Sliding Door Handle in 3 Steps
After you have prepared all the tools, now you are ready to replace your sliding door handle. Moreover, there are three easy steps that you will do later. The following are some steps you should take when replacing a sliding door handle:
1. Remove The Old Handle
Before you replace your sliding door handle, you better open the sliding door first. This will make it easier for you to remove the old handle of your sliding door. Then, make sure your sliding door can’t be pulled, then release the handle.
Around the edge of the handle, you will find some screws. Alternatively, there are some models of sliding doors that have screws on the edge of the door frame.
Then, remove the screw and the handle will come off easily. If it has been stuck to the door for a long time, you may need to pry it out with the tip of a flat screwdriver.
2. Calculate The Size Needed
Sliding door handle replacement is quite simple. The next step is you have to measure the hole in your sliding door. Take note of the key width and faceplate pattern you need. Then, you can calculate the distance between each mounting screw.
You can also find out your handle maker as well as your door maker. This will make it easier for you to find a replacement for your sliding door handle. Then, you can also calculate the exact size of the replacement sliding door handle.
3. Fit The New Handle
If you already have a new handle, you can install it on your sliding door. If you have a sliding door handle that is surface mounted, since the screws are on the face of the door, it will be easier for you to install. Although to screw in properly, you may need to drill new holes.
For mortise locks, you may encounter some difficulties. You can push the key into the frame and then attach the mortise rod. Then, insert the screws into the same holes as before. Afterward, push the lock into position.
However, in some cases, you will need to drill another hole to fit the rod. Nevertheless, make sure you cover any other holes with putty or something similar to protect your sliding door.
Those are the 3 steps for a sliding door handle replacement that is easy for you to do. The steps are very simple and you don’t need any professional help. In addition, you can also finish it quickly.
