Table of Contents
The market size of interior doors, including sliding closet doors, is predicted to reach USD 86.52 billion in 2030. This will continue to increase because there are many advantages to using sliding closet doors. However, if you have it, you need to know how to fix the sliding door for a closet.
This is because the sliding closet door is quite often problematic. Starting from difficult to operate, a door that goes out of the track, or a bent door slab. If you encounter this, here is how to fix the sliding door for a closet:
1. Check The Wheels
The first step is that you need to check the wheels. Some wardrobe doors have wheels and tracks on the bottom, but sometimes on the top. Then, lift your closet door and lower it off the track.
Also, you can check the wheels, whether they are bent, cracked, or chewed up. If it breaks, you can buy it at a hardware store. Then, you only need a few screws to install it.
2. Check The Track
If the wheels are in good condition, you can check the track. This is because the track can become clogged with debris, dirt, or wear. Or, the track can also be bent or cracked so that your closet door cannot slide smoothly.
3. Clean The Track
How to fix the sliding door for a closet is by cleaning the track. Moreover, you can use a microfiber cloth to clean the entire length of the track. Then, use a vacuum to suck up all the dust and dirt trapped in your closet track. A clean track can make your closet door easy for you to operate.
4. Replace Track If Needed
You will need to replace your closet track if the track is damaged. This is easy for you to do. You can measure the length of your current closet track. Then, buy new tracks available at hardware stores, either online or offline.
Afterward, remove the old track by taking out the screw. Also, remove the track from the closet door frame. Insert the new track into the existing space and fasten it. If you measure it correctly, the track will fit perfectly.
5. Realign The Doors
You can easily realign the door with the new track in place. Or, you can also realign the closet door without changing the track. The way is to take the doors off and put them back in. You have to be careful doing this and make sure each door is on its track.
6. Check The Doors for Warps or Damage
Closet door problems can also come from the door slabs themselves. This is because the door can warp over time. You can place the closet door on a level place and inspect the top and sides of the door for waves or bends. If your door closer has a wave or bend, you must replace it.
7. Lubricate The Tracks
To ensure a smooth glide, you can lubricate the tracks of your closet. Before lubricating it, you must make sure it is clean. You can lubricate the track using WD 40 and spray it along the track. Let it dry and your closet door can slide smoothly.
That’s an interesting review of how to fix the sliding door for a closet. Now you can repair your sliding closet door easily and quickly. However, if the damage is severe, you should seek professional help who can handle it.