How To Redo A Tub Shower In 2023

Table of Contents

Introduction

Are you tired of your old and worn-out tub shower? It’s time to give it a new lease of life! In this article, we will guide you through the process of redoing your tub shower. With some patience and the right tools, you can transform your bathroom into a modern and inviting space. Let’s get started!

Gather Your Tools and Materials

Before you begin the process, make sure you have all the necessary tools and materials. Some of the items you will need include a screwdriver, utility knife, caulk gun, grout scraper, waterproofing membrane, tile adhesive, tiles, grout, and a showerhead. It’s essential to gather everything beforehand to ensure a smooth and uninterrupted workflow.

Remove the Old Tiles

The first step in redoing your tub shower is to remove the old tiles. Use a grout scraper and a screwdriver to carefully pry the tiles away from the wall. Be cautious not to damage the underlying surface. Once all the tiles are removed, clean the area thoroughly to prepare it for the next steps.

Repair Any Damage

Inspect the wall for any damage or cracks. If you notice any, fill them with a suitable filler and let it dry completely. It’s important to have a smooth and even surface before proceeding to the next stage.

Apply Waterproofing Membrane

To prevent water damage, it’s crucial to apply a waterproofing membrane. Follow the manufacturer’s instructions to apply the membrane evenly over the entire wall surface. This step will ensure that your new tiles stay in place and protect the underlying structure from moisture.

Install New Tiles

Now comes the exciting part – installing the new tiles! Apply tile adhesive to the back of each tile and press them firmly onto the wall. Use tile spacers to maintain an even gap between each tile. Once all the tiles are in place, let them dry according to the adhesive manufacturer’s instructions.

Grout the Tiles

After the tiles have dried, it’s time to grout them. Mix the grout according to the instructions and apply it to the gaps between the tiles using a grout float. Make sure to remove any excess grout with a damp sponge before it dries. Allow the grout to cure for the recommended time.

Attach the Showerhead

Once the tiles and grout are completely dry, it’s time to attach the showerhead. Follow the instructions provided with the showerhead to ensure proper installation. Test the showerhead to make sure it’s working correctly and adjust the water pressure if necessary.

Apply Caulk

To provide a waterproof seal around the tub and shower, apply caulk using a caulk gun. Run a smooth and consistent bead of caulk along the edges where the tub and shower meet the wall. Use a damp finger or a caulk tool to create a neat finish. Allow the caulk to dry completely before using the shower.

Final Touches

Now that your tub shower is renewed, it’s time to add the final touches. Hang a shower curtain or install a glass door to complete the look. Add some decorative elements and accessories to make the space feel more inviting and personal.

Conclusion

Redoing a tub shower may seem like a daunting task, but with the right guidance and tools, it can be a rewarding project. By following these steps, you can transform your old tub shower into a beautiful and functional space that you’ll enjoy for years to come. So, roll up your sleeves and get ready to give your bathroom a fresh new look!

tub to shower conversion … Tub to shower conversion, Tub to shower